東莞市奧亞塑膠原料有限公司

PA尼龍料|PC塑料|PBT|PPS|LCP|POM|PEI|TPU|PES|PSU|氟塑料等等

站內搜索
 
新聞中心
產品分類
聯系方式
友情鏈接
您當前的位置:首頁 » 塑料價格 » PA66美國杜邦80G14A NC010A
PA66美國杜邦80G14A NC010A
點擊圖片查看大圖
產品/服務: 瀏覽次數:554PA66塑膠原料 
品 牌: 美國杜邦 
單 價: 電議/面議 
起訂量: 25 千克 
供貨總量:
發貨期限: 自買家付款之日起 1 天內發貨
更新日期: 2020-07-13  有效期至:長期有效
聯 系 人: 劉華 (先生)
公司電話:
即時通訊:    


«上一個產品     下一個產品»
產品屬性
 產品型號:  
 產品規格:  
 產品品牌:  美國杜邦
產品優勢
PA66美國杜邦80G14A NC010A:ytel?80G14A NC010A是一種14%玻纖增強,增韌,高流動性聚酰胺66樹脂。它提供了在注塑應用的出色表現
詳細信息
 PA66美國杜邦80G14A NC010A物性測試數據:
Processing Texts
Injection molding
PREPROCESSING

Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80°C
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.2 %

PROCESSING

Melt temperature optimum = 295°C
Melt temperature range = 285-305°C
Mould temperature optimum = 80°C
Mould temperature range = 50-100°C
Maximum Screw tangential Speed : 0.15 m/s
Flow front speed : 150 mm/s
Hold pressure optimum : 85 MPa
Hold pressure range : 50-100 MPa
Back pressure : low
Hold pressure time : 2.5 s/mm
Maximum hold-up time : 10 min
Rheological properties dry / cond Unit Test Standard  
Viscosity number 137 / * cm³/g ISO 307, 1157, 1628  
Moulding shrinkage, parallel 0.7 / * % ISO 294-4, 2577  
Moulding shrinkage, normal 0.8 / * % ISO 294-4, 2577  
Mechanical properties dry / cond Unit Test Standard  
Tensile Modulus 4800 / 3400 MPa ISO 527-1/-2  
Stress at break 108 / 66 MPa ISO 527-1/-2  
Strain at break 3.8 / 10 % ISO 527-1/-2  
Flexural Modulus 4400 / - MPa ISO 178  
Tensile creep modulus     ISO 899-1  
1h * / 3100 MPa    
1000h * / 2500 MPa    
Charpy impact strength     ISO 179/1eU  
23°C 70 / 76 kJ/m²    
-30°C 90 / 71 kJ/m²    
Charpy notched impact strength     ISO 179/1eA  
23°C 13 / 17 kJ/m²    
-30°C 10 / 7 kJ/m²    
-40°C - / 6 kJ/m²    
Izod notched impact strength     ISO 180/1A  
23°C 13 / - kJ/m²    
-40°C 6 / - kJ/m²
 
Thermal properties dry / cond Unit Test Standard  
Melting temperature, 10°C/min 263 / * °C ISO 11357-1/-3  
Temp. of deflection under load     ISO 75-1/-2  
1.8 MPa 240 / * °C    
0.45 MPa 258 / * °C    
Vicat softening temperature, 50°C/h, 50N 215 / * °C ISO 306  
Coeff. of linear therm. expansion, parallel 40 / * E-6/K ISO 11359-1/-2  
Coeff. of linear therm. expansion, normal 120 / * E-6/K ISO 11359-1/-2  
Thermal conductivity of melt 0.19 W/(m K) -  
Spec. heat capacity of melt 2350 J/(kg K) -  
Eff. thermal diffusivity 8.09E-8 m²/s -  
Flammability dry / cond Unit Test Standard  
Burning Behav. at 1.5mm nom. thickn. HB / * class IEC 60695-11-10  
Thickness tested 1.5 / * mm IEC 60695-11-10  
Burning Behav. at thickness h HB / * class IEC 60695-11-10  
Thickness tested 0.8 / * mm IEC 60695-11-10  
Electrical properties dry / cond Unit Test Standard  
Relative permittivity     IEC 60250  
100Hz 3.8 / 7.3 -    
1MHz 3.5 / 3.9 -    
Dissipation factor     IEC 60250  
100Hz 270 / 180 E-4    
1MHz 580 / 580 E-4    
Volume resistivity 1E15 / 1E10 Ohm*m IEC 60093  
Surface resistivity * / 1E14 Ohm IEC 60093  
Electric strength 36 / 36.5 kV/mm IEC 60243-1  
Comparative tracking index 600 / - - IEC 60112  
Other properties dry / cond Unit Test Standard  
Humidity absorption, 2mm 1.8 / * % Sim. to ISO 62  
Water absorption, 2mm 6.2 / * % Sim. to ISO 62  
Density 1190 / - kg/m³ ISO 1183  
VDA Properties Value Unit Test Standard  
Burning rate, Thickness 1 mm 44 mm/min ISO 3795 (FMVSS 302) DS
DS:  Derived from similar grade
 
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 - E5 (60°C)
ISO 1817 Liquid 2 - M15E4 (60°C)
ISO 1817 Liquid 3 - M3E7 (60°C)
ISO 1817 Liquid 4 - M15 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Water (90°C)
Phenol solution (5% by mass) (23°C)


Symbols used:
possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).


not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

相關產品
0條  相關評論
 免責聲明:(1)以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發布企業負責,環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! (2)同時我們鄭重提醒各位買/賣家,交易前請詳細核實對方身份,切勿隨意打款或發貨,謹防上當受騙。如發現虛假信息,請向環球塑化網舉報。
PC塑膠原料 TPU塑膠原料 ASA塑膠原料 TPV塑膠原料 TPEE塑膠原料 PA66塑膠原料代理商 PA66塑膠原料代理商 CAB塑膠原料供應商 PA6T塑膠原料 PES塑膠原料
©2024 環球塑化網 版權所有   技術支持: 環球塑化網     訪問量:1067240  管理入口

收縮
  • 電話咨詢

  • 0769-87120762
QR code
關閉
關閉
請輸入驗證碼